Train Station Announcement Voice: Free Online, No Sign Up

More versions

Variation: Reverb at 20%, echo off: standing right under the speaker.
Variation: Reverb 6 s at 55%: the main hall, words running together.

Use it in calls and on recordings

Try it here
Press Start mic above and talk. You hear this voice with the exact settings on this page, and every slider can be moved.
Use it live
Press Use this voice in calls, then pick Facecam Virtual Mic as the microphone in Discord, Google Meet, Zoom or any other call that runs in Chrome.
Put it on a recording
Open Online Voice Changer, record or upload a file, choose the same settings and download the result.

More about this voice

A small speaker in a very large hall

Part	Setting	What you hear
Hall	Reverb 40% mix, 3.8 s long	Glass, steel and stone ringing after each phrase
Far platforms	Echo every 0.38 s, 30% mix	The announcement arriving a moment later from other speakers
Horn speaker	Bass cut below 400 Hz, treble cut above 3.5 kHz	A tinny voice from high overhead
Edge	Midrange +5 dB around 1.7 kHz	Enough bite to hear platform numbers
Old amplifier	Distortion drive 0.25, 45% mix	A slight rattle on stressed syllables

Reading an announcement properly

Go one phrase at a time: the train, then stop; the destination, then stop; the platform, then stop. Each needs about a second of quiet for the 0.38-second echo to clear.
Say times and platform numbers slower and louder than everything else. They are the only words travellers listen for.
Use the announcer's melody: level through the sentence, dropping on the final word.
No chime is added before you speak. Play one from the soundboard and wait for it to ring out.

Under the speaker or across the concourse

The main clip stands you halfway down a platform. The words are readable, with a long wash behind them. The second clip pulls the reverb back to 20% and turns the echo off, which is the sound right under the speaker. Pick it when viewers have to catch every word, such as a stream schedule or a delay joke with a punchline. The third stretches the reverb to 6 seconds at 55%: the main hall, where words run together and only the rhythm survives. It works as atmosphere for a travel video or a railway roleplay scene, not for information.

The exact settings

Setting	Value
Noise gate	mutes the mic below -50 dB, between words
Distortion	drive 0.25, 45% mix
Bass cut	below 400 Hz
Treble cut	above 3.5 kHz
Midrange	+5 dB around 1.7 kHz
Echo	repeats every 0.38 s, 30% mix
Reverb	40% mix, 3.8 s long
Compressor	steadier volume (8:1 from -30 dB, then +6 dB)

Free train station announcement voice FAQ

Why does the echo disappear in Discord?

Discord's noise suppression treats the 3.8-second tail as background and removes it. Switch noise suppression off in Voice & Video settings and the hall comes back.