Free Sports Announcer Voice Changer
Call the game in a stadium voice: loud, forward and ringing around the stands. Free, no sign-up.
Updated · Tested by the Facecam team
Before and after
Your browser will ask for microphone access when you click.
More versions
Variation: Reverb off: a commentary booth instead of the stadium PA.
Variation: Narrowed to 400 Hz–4 kHz: an old ballpark loudspeaker.
How to sound like a sports announcer
This voice adds grit, adds bass, adds a nasal edge and adds a little room around you.
Press Start mic above and talk. To use it in a call, press Use this voice in calls, then pick Facecam Virtual Mic as the microphone in Discord, Google Meet, Zoom or any other call that runs in Chrome. In games and desktop apps, pick Facecam Virtual Microphone from Facecam for PC and Mac. For a recording, open Online Voice Changer.
Clone your voice, then make it say anything
Record 5 to 30 seconds of your voice once. Then type any line and hear it in your voice, or narrate your videos with it.

More about this voice
It's the PA, not the pitch
Stadium announcers don't have unusually deep voices; the sound comes from the system. Heavy compression makes every syllable the same loudness, horn speakers push the upper mids, and the arena answers a moment later. That's why this voice leaves Pitch and Tone at 0 and puts all the work into the chain, with the reverb starting 60 milliseconds late, like a far wall.
Three seats in the stadium
| Clip | Change | Where you are |
|---|---|---|
| Stadium PA | as set | In the stands, hearing the announcer over the speakers |
| Booth | Reverb off | Play-by-play commentary on a broadcast |
| Old ballpark | 400 Hz to 4 kHz only | A vintage loudspeaker on a pole |
Lines that sell it
- Starting line-ups: stretch the name, punch the number.
- Leave a full second after each line so the reverb can ring.
- Pair it with the air horn and applause sounds from the Facecam soundboard.
Play-by-play or stadium PA
The stadium version is for announcements: names, scores, the next event. Fast commentary over a 2.2-second reverb turns to mush, because each word is still ringing when the next one starts; in our clip the hall rings on for more than a second after the last word. For calling a game as it happens, use the booth clip, which is the same chain without the reverb.
People use it for fantasy draft nights, school sports and esports streams, backyard tournaments and gaming montages. The old ballpark clip is almost all midrange, with next to nothing left below 250 Hz, so it cuts through crowd noise in a video edit.
The exact settings
| Setting | Value |
|---|---|
| Noise gate | mutes the mic below -55 dB, between words |
| Pitch | 0 (unchanged) |
| Distortion | drive 0.15, 30% mix |
| Bass cut | below 120 Hz |
| Bass | +4 dB below 150 Hz |
| Midrange | +5 dB around 2.5 kHz |
| Reverb | 22% mix, 2.2 s long |
| Compressor | steadier volume (8:1 from -30 dB, then +6 dB) |

Free sports announcer voice changer FAQ
Can it do a specific famous announcer?
No. It gives you the stadium sound on your own voice; it doesn't imitate real people.
Can I use it for a local game or school event stream?
Yes, through a streaming studio that runs in Chrome. For a real PA you'd still need the venue's own system.
Why does the tool show the Announcer preset?
This voice is built from it, with the pitch change removed and the PA chain added. Reset brings back plain Announcer.










