Free Kylo Ren Voice Changer
A free gritty, electronic mask voice in the style of Kylo Ren.
Updated · Tested by the Facecam team
Before and after
Your browser will ask for microphone access when you click.
More versions
Variation: Robot off, distortion 0.1: the voice with the helmet off.
Variation: Distortion 0.65: the mask's speaker clipping on a shout.
How to sound like Kylo Ren
This voice lowers your pitch by 3, makes you sound bigger, adds a robot buzz, adds heavy grit, muffles the treble and adds a nasal edge.
Press Start mic above and talk. To use it in a call, press Use this voice in calls, then pick Facecam Virtual Mic as the microphone in Discord, Google Meet, Zoom or any other call that runs in Chrome. In games and desktop apps, pick Facecam Virtual Microphone from Facecam for PC and Mac. For a recording, open Online Voice Changer.
Clone your voice, then make it say anything
Record 5 to 30 seconds of your voice once. Then type any line and hear it in your voice, or narrate your videos with it.

More about this voice
What the mask adds to your voice
| Part | Setting | What you hear |
|---|---|---|
| Register | Pitch -3, Tone -2 | Your voice a little lower and broader, still human |
| Vocoder buzz | Robot 28 Hz, 18% mix | A low electronic flutter under each word |
| Grit | Distortion 0.4, 55% mix | A rough, overdriven mask speaker |
| Mask shape | Bass cut below 120 Hz, treble cut above 4.5 kHz, midrange +5 dB around 700 Hz | A closed-in, honky tone with no air |
Performing the masked voice
- Keep your voice quiet and tense, as if holding back anger. The compressor brings quiet speech up, so restraint still sounds loud.
- Break sentences into short clipped pieces. Distortion smears long vowels, and stops between phrases keep it readable.
- Save one burst of volume for the key word. A sudden loud syllable drives the distortion harder and sounds like the mask overloading.
- Stay about a fist away from the mic so consonants cut through the grit.
Kylo Ren, Darth Vader or Masked Horror?
The Darth Vader-style voice is lower (Pitch -6) and cleaner: its helmet is a slow flanger and a short reverb, so it sounds large and calm. This one is only three steps down and gets its character from distortion, so it comes across younger, angrier and more electronic. The Masked Horror preset, which this page starts from, is a generic disguised caller with no named character behind it. Choose the Kylo Ren style for confrontations and outbursts, and the Vader style for slow commands.
The exact settings
| Setting | Value |
|---|---|
| Noise gate | mutes the mic below -50 dB, between words |
| Pitch | -3 (lower) |
| Tone | -2 (sounds bigger) |
| Robot | 28 Hz buzz, 18% mix |
| Distortion | drive 0.4, 55% mix |
| Bass cut | below 120 Hz |
| Treble cut | above 4.5 kHz |
| Midrange | +5 dB around 700 Hz |
| Compressor | steadier volume (6:1 from -28 dB, then +5 dB) |

Free Kylo Ren voice changer FAQ
Is this the official Kylo Ren voice?
No. It is an imitation made from pitch, distortion and a ring-modulator buzz. Nothing is sampled from the films.
What does it sound like with the helmet off?
Play the second clip: the robot buzz is off and distortion drops to 0.1, which leaves a lowered, nearly clean voice.
Can I make a Kylo Ren voiceover for TikTok?
Yes. Record or upload your line in the Online Voice Changer with these settings, download the file and add it to your video in the TikTok editor.
The words are hard to make out. What should I change?
Lower Distortion toward 0.25 first. If it is still unclear, take the Robot mix below 18%.









