Skip to content

40% off every plan

See plans
facecam

Free Producer Tag Generator

Type your producer name, hear it as a deep, echoing producer tag, and drop the WAV at the start of your beat.

Updated · Tested by the Facecam team

Character Voice Generator: type it, hear a character

The producer tag, before and after

  • Producer tag chain

    Flint, pitched down by the Deep effect, with a 320 ms echo and a 2.4 s room

    Trap, drill and hip-hop beats, type beats on YouTube, beat store previews

    “Kairo on the beat.”

  • Wren in the Cave Echo

    A smooth British woman's voice with a huge stone-room echo

    An airy, softer tag over melodic beats, lo-fi and R&B

    “You're now listening to Kairo.” Wren with the Cave Echo effect.

  • Flint, no effect

    Low and rugged American man, the voice under the chain

    Hearing what the chain starts from, or a dry tag you process in your own DAW

    The same tag from Flint at 0.95× speed, dry.

How to make a producer tag in 3 steps

  1. Type your tag

    The tool above opens on the Producer tag style with a sample line. Replace Kairo with your name, or write your own tag.

  2. Generate

    Press Generate. The speech is made on our server; the deep voice, the echo and the room are added in your browser.

  3. Tune it and download

    Try another voice, or switch the effect to Cave Echo or Announcer. Re-rendering a line you already made doesn't cost anything. Then save the WAV and drop it into your DAW.

Where producers use a voice tag

  • The first bar of every beat

    The tag plays over the intro, so anyone who hears the beat knows who made it, even after it gets reposted.

  • Type beats and beat store previews

    Lay the tag over a preview once or twice so a beat can't be downloaded and used untagged.

  • Mixtapes and DJ sets

    Use it as a drop between tracks, the way DJs announce themselves on a mix.

  • Live beat-making streams

    Fire the tag from the Soundboard into your stream when a beat is done.

    Soundboard for streaming

What makes it sound like a producer tag

Most tags are short, low and spacious: a name said once, then repeated by an echo that trails off under the beat. Here that is three steps: Flint, the lowest rugged voice, at 0.95× speed; the Deep effect, which drops the pitch and adds chest; and a 320 ms echo with a 2.4 second room on top. The settings table lists every value, so you can rebuild it in your own DAW.

It isn't any famous producer's tag. Write your own line with your own name; that is the point of a tag.

The exact settings

SettingValue
VoiceFlint (ElevenLabs stock voice: low and husky)
Speed0.95×
EffectDeep Voice, adjusted as below
Noise gatemutes the mic below -55 dB, between words
Pitch-7 (lower)
Tone-3 (sounds bigger)
Bass+3 dB below 150 Hz
Echorepeats every 0.32 s, 40% mix
Reverb30% mix, 2.4 s long
Compressorsteadier volume (4:1 from -24 dB, then +4 dB)
TextUp to 5,000 characters per line

Clone your voice, then make it say anything

Record 5 to 30 seconds of your voice once. Then type any line and hear it in your voice, or narrate your videos with it.

Clone your voice

More about this voice

Write a tag that sticks

  • Keep it to two to five words. The echo needs room after the last one.
  • Put your name first or last, where the echo repeats it.
  • Spell an unusual name the way it sounds (“Kai-roh”), then check the result.
  • Make a second, softer version for slow beats with another voice and the Cave Echo.

What famous producer tags have in common

The producer tags everyone knows are a name and a few words: “Metro Boomin want some more”, “Mustard on the beat, ho”, “Murda on the beat so it's not nice”, DJ Khaled's “Another one”. Most are said once over the intro, often by a friend or a featured artist rather than the producer, and the name is the word that lands. The famous ones stick because they never change: the same tag, at the same spot, on every beat.

Write yours the same way. Pick one line with your name in it, keep it under five words, and use it on every beat you put out, so listeners learn it.

Producer tag generator FAQ

What is a producer tag?

A short voice line with the producer's name, played at the start of a beat (and sometimes again later) so everyone who hears it knows who made it.

What are some famous producer tags?

Metro Boomin's “Metro Boomin want some more”, Mustard's “Mustard on the beat, ho”, Murda Beatz's “Murda on the beat so it's not nice” and DJ Khaled's “Another one” are some of the best known. They're theirs, so make your own with your own name.

How do I put the tag on my beat?

Download the WAV, drag it onto a track in your DAW over the first bar, and turn it down until it sits on top of the beat without covering it.

Can I use the tag on beats I sell or lease?

Yes. The tag you make is yours to use on your own beats, including ones you sell, lease or post on YouTube.

Can I make a female or whispered tag?

Yes. Pick another voice in the tool, such as Wren or Pixel, and try the Cave Echo or Ghost effect for a softer, airier tag.

Do I need an account?

No. Free to try: 3 lines a day, no account. Beyond that, a paid plan. The speech is made on our server; the effects run in your browser.