Why Is Only One of My Headphones Working?
Why only one side of your headphones works, and a three-chime test that tells the causes apart. We recorded what each fault does to the sound, ear by ear.
By Facecam team
Published · 8 min read

On this page
- How do you find out which side is failing?
- What does each test result mean?
- Why do Left and Right both come out of both ears?
- Why does music lose its vocals when the plug is half in?
- Should mono audio be on or off?
- What if one wireless earbud is silent?
- How do you know the headphones are broken?
- What didn't we test?
- Questions
Short answer
Usually it's a balance or mono setting, a plug that isn't all the way in, a Bluetooth earbud that lost its sync, or a dead cable or speaker. Play a left, a both and a right test chime to tell which: a side that stays silent is a dead channel. If Left and Right both come out of both ears, it's the mono setting when the both chime sounds normal, and a plug that has lost its ground contact when the both chime goes silent.
Every guide we read on 2 November lists the same suspects: balance, a loose plug, Bluetooth, a broken cable. They don't tell you how to work out which one you have, and two of them give opposite advice about mono audio. So we recorded what each fault does to a set of test sounds, ear by ear. Three chimes turn out to be enough to tell the common causes apart.
How do you find out which side is failing?
Play a sound that comes from one side only, then the other, then both. Sound Test is a free browser tool that checks your speakers and headphones: left and right channels, a stereo sweep, a bass and frequency sweep and a volume check. It needs no download, mic or account, and works on a phone too.
Plug in or connect the headphones first
Push a wired plug in until it stops. Take a thick phone case off if it might be holding the plug out.
Open Sound Test and keep the volume at 50%
That's where it starts. Turn it up only if you hear nothing at all.
Play Left, then Both, then Right
Each chime is three rising notes, about 1.3 seconds long. Note which ear each one comes from, and whether Both sounds centred.
Play the stereo sweep
A tone travels from left to right and back over 6 seconds. Listen for a gap as it passes the middle.
Play the bass sweep
It rises from 20 to 200 Hz over 10 seconds, in both ears at once. If it never comes in, while the chimes did, read the section on half-in plugs below.
Match what you heard to the table below
Then do the fix for that row first, and play the chimes again to check.
What does each test result mean?
Each fault leaves its own pattern across the chimes. The table shows what reached each ear in our recordings. One detail first: the Both chime is 3 dB quieter in each ear than a one-side chime (peak 0.195 against 0.275), because it splits the same sound across two speakers. That's normal, not a fault.
| Sound Test plays | Working stereo | Mono switch on | Plug lost its ground | Right side dead |
|---|---|---|---|---|
| Left chime | Left ear only | Both ears, −6 dB | Both ears, −6 dB | Left ear only |
| Both chime | Both ears, centred | Both ears, centred | Silent | Left ear only |
| Right chime | Right ear only | Both ears, −6 dB | Both ears, −6 dB | Silent |
| Stereo sweep | Moves left to right | Doesn't move | Drops out in the middle | Left half only |
| Bass sweep | Both ears | Both ears | Silent | Left ear only |
| Pink noise | Both ears | Both ears | Both ears, 3 dB quieter | Left ear only |
A side that stays silent through Left, Both and the bass sweep is a dead channel: the balance slider at one end, a broken wire or speaker, or a wireless earbud that isn't connected. If Left comes out of your right ear, nothing is broken: the headphones are on backwards or two speaker cables are swapped.
Why do Left and Right both come out of both ears?
Either the mono switch is on, or the plug has lost its ground contact, and the Both chime tells you which. With mono on, the Left and Right chimes sound identical, centred and 6 dB quieter, but Both plays normally. With a lost ground, Left and Right also come from both ears, but Both disappears completely. In our recording it fell below −90 dB, which is digital silence.
Left, Both, Right: working stereo
The same chimes with the plug's ground lost
The stereo sweep shows the same thing as a gap. Played normally, the tone is still at 71% of its peak as it passes the middle. With the ground lost, it falls to 2% at the middle and only comes back towards the sides. That's what Sound Test's hint means by "no gap in the middle".
| Working stereo | Ground lost | |
|---|---|---|
| Start, left | 100% | 49% |
| 0.5 s | 99% | 44% |
| 1 s | 92% | 27% |
| 1.5 s, middle | 71% | 2% |
| 2 s | 92% | 27% |
| 2.5 s | 99% | 44% |
| 3 s, right | 100% | 50% |
| 3.5 s | 99% | 44% |
| 4 s | 92% | 27% |
| 4.5 s, middle | 71% | 2% |
| 5 s | 92% | 27% |
| 5.5 s | 99% | 44% |
Stereo sweep: working
Stereo sweep: ground lost
Why does music lose its vocals when the plug is half in?
Because a plug that has lost its ground contact plays only the difference between left and right. A 3.5 mm headphone plug has three contacts: the tip carries left, the ring carries right and the sleeve is the shared return. When the sleeve doesn't touch, the two earpieces end up wired in series, out of phase. Anything mixed to the centre, like vocals, kick drum and bass, cancels out. Wide sounds such as reverb and stereo guitars survive, so it sounds hollow and far away.
Our pink noise showed the same split: its two channels are different random noise, so it lost only 3 dB, while the centred bass sweep vanished. The same effect happens when a headset with a mic plug, wired one way, goes into a device wired the other way (the CTIA and OMTP standards). Fixes, in order: push the plug all the way in, remove a case that stops it, clean the jack, and try without any adapter.
Should mono audio be on or off?
Off while you test, on if one ear is really dead and you can't replace the headphones yet. Mono adds both channels together and sends the result to each ear. That's why the guides disagree. It makes a left/right test useless, because every chime comes from the middle. But with one dead earbud, mono is the only way to hear everything in the other one. The cost, in our numbers: anything panned hard to one side reaches each ear 6 dB quieter.
- Windows 11: Settings > Accessibility > Audio > Mono audio.
- Mac: System Settings > Accessibility > Audio > Play stereo audio as mono.
- iPhone and iPad: Settings > Accessibility > Audio & Visual > Mono Audio. The Balance slider is on the same screen.
- Android: Settings > Accessibility > Audio adjustment (the name varies by phone), with Mono audio and Audio balance.
While you're in those settings, check the balance slider is in the middle. A slider at one end gives exactly the dead-side pattern in the table, and it's the quickest thing to rule out.
What if one wireless earbud is silent?
Play Left and Right to confirm which bud is out, then reset the pair. The earbud makers' own fixes are to put both buds in the case to charge and resync, forget the earbuds in your phone's Bluetooth settings, and pair again using the model's reset steps. A bud that is in your ear but quieter than the other in the Both chime often just isn't sealed; a different ear-tip size fixes that.
How do you know the headphones are broken?
Swap one thing at a time. Run the chimes with the same headphones on another device, then with another pair on your device. If the silent side follows the headphones, they're the problem. On a wired pair, play the stereo sweep on repeat and bend the cable gently near the plug and near the earcup: a side that cuts in and out as you bend has a broken wire. A side that stays silent everywhere, on any device and with no bend making a difference, is usually the speaker itself, which is a warranty job.
If your mic sounds wrong as well, the Mic Test and our guide to why your mic sounds bad cover that end. For a quick channel check alone, the left right audio test opens Sound Test on the chimes, and the bass test opens it on the bass sweep.
What didn't we test?
- Real broken headphones. We recorded Sound Test's actual output and applied each fault's wiring to it. A real half-in plug can also touch some contacts and not others, so a pair may lose one channel instead.
- Bluetooth faults. Earbud sync and pairing problems are covered from the makers' own help pages, not from our measurements.
- Every operating system's mono mix. We used a plain average of the two channels. Windows, macOS, iOS and Android may scale the result differently, so the −6 dB figure may vary by a few dB.
- Your music. How much a lost ground removes depends on the mix. Centred vocals vanish; a song with wide stereo keeps more.
Questions
Why can I only hear out of one earbud?
Usually the other earbud is out of sync, out of charge, or the balance or mono setting is off. Play a left and a right test chime to confirm which side is silent, then charge both buds in the case, forget and re-pair them, and check the balance slider is centred.
Why do my headphones play both sides but the voices are gone?
The plug has probably lost its ground contact, so each earpiece plays only the difference between left and right and anything mixed to the centre cancels out. Push the plug all the way in, remove any case that blocks it, and try without an adapter.
Does mono audio fix one headphone not working?
It works around it: mono sends the full mix to both ears, so you hear everything in the side that works. Turn it off before you run a left/right test, because with mono on every test chime comes from the middle.
Is a free online headphone test accurate?
For left, right and mono problems, yes: Facecam's Sound Test makes its tones in your browser and plays each chime from one channel only. Bass results depend on your volume and your ears, so use them to compare devices rather than as a lab measurement.
Keep reading

Streaming & Setup
How to Make Your Webcam Brighter
How to make your webcam brighter when you can't change the room. We darkened the same webcam clip three ways and measured what colour looks, a brightness slider and our low-light fix each did to it.
7 min read

Streaming & Setup
How to Look Good on Webcam
How to look better on webcam in five minutes, mostly by moving a lamp. We ran the same clip through our Webcam Test lit and darkened, and the dark one failed on more than brightness.
4 min read

Streaming & Setup
What Is a Virtual Camera?
A virtual camera is a webcam that isn't a webcam: software pretending to be one, so your call or stream app can show an avatar, a game scene or an effect instead of your plain camera.
5 min read
Free, in your browser
Sound Test
Sound Test is a free browser tool that checks your speakers and headphones: left and right channels, a stereo sweep, a bass and frequency sweep and a volume check.
Open Sound Test