Skip to content

40% off every plan

See plans
facecam

How to Face Swap Multiple People in a Video

Swapping faces on two or more people in one clip takes one extra step: telling the tool which face goes on which person. We tested what happens with and without it, frame by frame.

By Facecam team

Published · 6 min read

One frame of a two-person clip after two face swaps: the default swap put the new face on the friend leaning in, while the swap with both faces picked gave each woman her own new face
One frame of a two-person clip after two face swaps: the default swap put the new face on the friend leaning in, while the swap with both faces picked gave each woman her own new face
On this page
  1. How do you face swap two people in one video?
  2. Why did the new face jump to the other person?
  3. How does picking faces keep each face on the right person?
  4. Can you swap only one person and leave the others alone?
  5. What does a multi-face video swap cost?
  6. What still goes wrong with several faces?
  7. Questions

Short answer

Upload the clip, tap each person in the row of faces the tool finds, give each one their own new face, then swap. Skip the picking and a one-face swap changes only the biggest face in each frame: in our test the new face jumped to a friend leaning toward the camera for 33 of 121 frames. With both faces picked, Facecam followed each woman by her face, and each kept her own new face in all 121 frames.

Two friends in one clip, two new faces. It sounds like the same job as a single face swap, done twice. It isn't, because a swap that doesn't know who is who decides again on every frame, and people move.

How do you face swap two people in one video?

Use a video face swap that finds every face and lets you pick a new one for each person. In Facecam's Video Face Swap, that's up to 6 people in a clip of up to 10 minutes.

  1. Add the first new face

    Open Video Face Swap and upload a face photo in the Face slot, or pick a built-in face. Use a clear, front-facing photo.

  2. Upload the clip

    MP4, MOV or WebM. The tool looks at three moments of the clip (10%, 50% and 85% of the way in), takes the one with the most faces and shows them as a row under Faces in this video.

  3. Give each person their face

    The biggest face already has the face from the Face slot. Tap another person, then choose Upload their new face or pick a built-in one. A person you don't tap keeps their own face.

  4. Swap and check the busy moments

    Sign in and click Swap face. When it's done, scrub to the moments where people move closer, turn or cross, and check each face is still on the right person.

If someone only shows up between those three moments, they won't be in the row of faces. Trim the clip so they are visible near the start, middle or end, or swap that part on its own.

Why did the new face jump to the other person?

Because a plain one-face swap changes the biggest face in each frame, and the biggest face can change. The tool doesn't remember who it swapped a moment ago: every frame, it finds the faces and takes the largest.

In our clip the woman in yellow is the biggest face most of the time. Then her friend leans toward the camera, her face grows, and from frame 15 to 47 the new face sat on the friend instead. That's 33 of 121 frames (27%), about 1.4 seconds in which the woman in yellow had her own face back. A GIF of the same moment did the same thing: 21 of its 75 frames.

One frame of a two-person clip after two face swaps: the default swap put the new face on the friend leaning in, while the swap with both faces picked gave each woman her own new face
Frame 30 of our test clip. Left: the default swap, with the new face on the friend leaning in. Right: both faces picked, so each woman keeps her own new face. The round insets are the new faces each swap was given. Facecam's swap job code, unedited; everyone in it is computer-made.

It's an easy failure to miss: in a quick look at the start and end of our clip, everything was fine. Expect it whenever two people are close in size on screen and one of them moves toward the camera.

How does picking faces keep each face on the right person?

Picking faces switches the swap from "the biggest face" to "this person". Each person you tap is turned into a faceprint, a list of numbers a face recognition model (ArcFace) makes from a face. In every frame, each face found is compared with those faceprints, and a face only gets a new face when it matches one of the people you picked.

The scores show why that holds up. On a scale where 1 is identical, each woman matched her own picked face at 0.55 or more in every frame (0.72 on average), and the other woman's at 0.14 at most. The swap needs 0.35, so even while the friend leaned in and laughed, there was never a frame where the two could be mixed up.

Our 5-second, 121-frame clip of two women, swapped three ways, October 23, 2026.
How we swappedWoman in yellowHer friendWrong person
Default (one face)New face in 88 framesNew face in 33 frames33 frames
Both faces pickedHer new face in all 121Her new face in all 1210
Only the woman in yellow pickedHer new face in all 121Kept her own face in all 1210
Frames with every face on the right person (Share of 121 frames, our two-person test clip · October 23, 2026)
Value
Default (one face)73%
Both faces picked100%
Only the woman in yellow picked100%
A frame counts as right when the new face is on the person it was meant for and nobody else's face changed. Checked from the swap's own log and again by comparing each face with the original clip.

Can you swap only one person and leave the others alone?

Yes. Tap the person you want to change and give them a new face, then click the small × next to the biggest face's new face (Keep this face). The person you picked is followed by their faceprint, and everyone else is left as they are. In our run with only the woman in yellow picked this way, she had her new face in all 121 frames and her friend was untouched in all 121.

One catch: if the person you want is the biggest face in the clip, giving them the Face slot's face is the plain one-face swap described above. That's fine when nobody else gets close to the camera. When someone does, check those seconds after the swap; if the face jumped, cut the clip at that moment and swap the parts separately.

What does a multi-face video swap cost?

Each face you pick is charged like its own swap of the clip. Video Face Swap counts by the second of video, so two people on a 30-second clip use 60 seconds of your video time, against 30 for one face. A face you leave as it is costs nothing, and a swap that fails doesn't count.

For a group photo rather than a video, the same picking works in Multiple Face Swap, with each face counted as one photo swap.

What still goes wrong with several faces?

  • Hands over a face. In a one-person test clip where the woman in yellow hid her face in her hands, the swap still found her and drew the new eyes over her fingers for about a second. Cut those frames, or pick a clip where hands stay clear of faces.
  • People missing from the row. Faces are found on three moments of the clip. Someone who is only on screen in between can't be picked.
  • Look-alikes. Our two women scored far apart. Twins, or two people with very similar faces, will score closer together; we didn't test that.
  • More people, more cost. Six people on a 60-second clip is six times the price of one.

Questions

Can you face swap two people in the same video?

Yes. In Facecam's Video Face Swap, tap each person in the row of faces it finds and give each one a new face, up to 6 people per clip.

Why does my face swap switch between people?

A one-face swap changes the biggest face in each frame, so when someone else gets closer to the camera, the new face moves to them. Picking each person's face fixes it, because the swap then follows faces, not size.

Can I swap one person in a group video and keep the rest?

Yes. Give only that person a new face, and click the × (Keep this face) next to the biggest face so it stays as it is. Everyone you don't pick keeps their own face.

How many faces can I swap in one video?

Up to 6 people in one clip of up to 10 minutes. For more, swap the result again with the rest of the faces.

Does swapping two faces cost double?

Yes. Each face you pick is charged like its own swap of the clip, so two faces on a 30-second clip use 60 seconds of video time instead of 30.

Keep reading

  • A webcam frame and the same frame with a different face swapped in live, side by side

    Face Swap

    Is Swapface Safe?

    Is Swapface safe to download and pay for? We downloaded its Windows installer, checked the signature and read its privacy, refund and terms pages on November 8, 2026. Here is what's fine, and the three things to watch.

    7 min read

  • Six faces made with Character Generator for the test: a photo, a semi-realistic painting, a 3D cartoon, a flat vector cartoon and two anime drawings

    Face Swap

    Which Character Prompts Make a Good Face Swap Face?

    Character prompts for face swap should describe the face itself, because that's the only part a swap carries. We generated 42 faces from 21 descriptions and swapped every one to see which words survive.

    7 min read

Try it

Video Face Swap

Video Face Swap is a browser tool that swaps the face in every frame of a short video for the face you upload, keeps the sound, and gives you an MP4 back at the original size.

Open Video Face Swap